Kit, Calibration RF Bridge DC-4.0 GHz CKB050

Features:

  • High Precision Termination > 45 dB
  • Rugged Construction
  • Use to calibrate hand-held analyzers
  • Use to calibrate return loss bridges
  • One year calibration cycle
  • Power rating: 2 watts continuous
  • Calibration plot of termination included
  • Certificate of calibration included

    • Applications

    This kit is used to verify the calibration on the EAGLE RLB150 or RLB250 family of return loss bridges. The kit can also be used to verify or calibrate low end analyzers such as the Anritsu SiteMaster, Bird Site Analyzers or Aeroflex 3500 Test Sets. The terminations supplied have more than adequate directivity for this class of analyzer. The components are contained in a durable plastic case. This not only protects the components during transit from one job to another, but also helps prevent loss.

    The kits are supplied with all components having a "fresh" calibration. A certificate of calibration is included as standard.

    Description

    This kit contains a precision 50 ohm termination. The termination is used during the "load" portion of a calibration. The DC accuracy of the termination is within .05 ohm.

    There is also an open. When installed this provides a dimensionally accurate outer transmission line for the female pin of the device being calibrated.

    The precision short is used to short the female pin at the reference plane. It is used when a short is called for in the calibration procedure.

    The case is 6 1/2" wide x 4 3/4" deep x 1 3/4" high. All of the components are supplied with the kit.

    to next Column

    Availability

    The parts that are supplied with these kits are normally in stock so a kit can be constructed within one week of order.

    Specifications & Ordering

    Please see the next page for detailed specifications. These products can be purchased directly from EAGLE or through our distributors. Refer to the price list on this site for pricing and terms for this product.

    Pictured below closed and open kit

    to next Page

    Page 2

    TABLE OF SUPPLIED COMPONENTS

    Item

    Part No

    Description

    Function

    Termination, 50 ohm

    RFT050NM2

    Termination, 50 ohm, DC-4.0 GHz

    Provide accurate 50 ohm point.

    Termination, Open

    RFT-INFNM2

    Termination, open, DC-6.0 GHz

    Provide proper 50 ohm dimension to line

    Termination, Short

    RFT000NM1

    Termination, 0 ohm, DC-6.0 GHz

    Provide short right at reference plane of N connector

    Case and Foam

    03 2710 A002252

    Case, with foam padding

    Carrying case for everything

    SPECIFICATIONS

    Electrical:

    Mechanical:

    Case Size:

    Refer to individual component

    6 1/2"W x 4 3/4" D x 1 3/4" H

    sheets for detailed specifications

    Weight:

    < 1.0 lb

    website: eagle-1st.com

    email: use contact page

    Phone: 928 204-2597

    PO Box 4300

    fax: 928 204-2568

    Sedona, AZ 86340

    10 Aug 2009 css-nsf ΥΤΦ-8