BKG2590: Kit, RLB for General Dynamics R2590

Features:

  • Used with Gen Dynamics R2590 CSM
  • Foam with cutouts included
  • High performance return loss bridge
  • Custom coaxial cables with port labels
  • Use for antenna/cable measurements
  • Use for reflection measurements
  • Precision termination and short
  • Two attenuators included

  • Applications

    This kit is designed to compliment the General Dynamics R2590 communications service monitor. Option RLN5304A is required in order to use this kit to the fullest extent. Included are all components required to make high precision return loss measurements.

    To simplify the setup, the cables are labeled as to which port they connect to on the service monitor and return loss bridge. The connectors are exact mates so that no adapters are required. This allows the return loss bridge to be directly connected to the DUT. It is not recommended to use a cable between the bridge and the DUT as this cable will become part of the measurement.

    Description

    The components are contained in a durable plastic case. This not only protects the components during transit from one job to another, but also helps prevent loss. The case is 10 wide x 8 5/16 deep x 3 high.

    The return loss bridge covers from 5.0 Mhz to 2000 Mhz. For more information see RLB150N4A specification sheet.

    The precision termination and short are used to verify that the bridge is in calibration and to determine the open/short ratio before making your measurement.

    to next Column

    Description-continued

    Two six db attenuators are included. These are useful when making return loss measurements where most of the power is reflected (high return loss). In these types of measurements it is necessary to improve the open/short ratio. Using the attenuators improves the port match which improves the open short ratio.

    The included power divider can be used for cable distance to fault measurements in conjunction with the R2590 and optional software.

    Availability

    The parts that are supplied with these kits are normally in stock so a kit can be constructed within one week of order.

    Specifications & Ordering

    Please see the next page for detailed specifications and ordering information. Refer to the price list on this site for pricing and terms for this product.

    to next Page

    Page 2

    TABLE OF SUPPLIED COMPONENTS

    Item

    Part No

    Description

    Use

    Return Loss Bridge

    RLB150N4A

    Bridge, 5-2000 Mhz 40 dB

    VSWR and Return Loss

    Test Cable 1

    128BMNM02R0

    Cable, 50 ohm, BNC(m)-N(m), 2.0'

    R2590 Gen. out to SRC on RLB

    Test Cable 2

    128BMNM02R0

    Cable, 50 ohm, BNC(m)-N(m), 2.0'

    R2590 Ant. in to Ref. on RLB

    Termination

    RFT050NM2

    Termination, 50 ohm, Precision

    Directivity cal of bridge

    Short

    RFT000NM1

    Termination, 0 ohm

    Open/short cal of bridge

    Power Splitter

    HPD123NF

    Divider, Power DC-3.0 GHz

    Use for cable fault test prog

    Attenuator

    PFA060N

    Attenuator 2W, 6 dB

    Gen out to improve port match

    Attenuator

    PFA060N

    Attenuator 2W, 6 dB

    Anal In to improve port match

    Case

    01 1231 000001

    Case, with foam padding

    Carrying case for everything

    SPECIFICATIONS

    Electrical:

    Mechanical:

    Case Size:

    Refer to individual component

    10"W x 8 5/16" D x 3" H

    sheets for detailed specs

    Weight:

    < 2.0 lbs

    website: eagle-1st.com

    email: use contact page

    Phone: 928 204-2597

    PO Box 4300

    fax: 928 204-2568

    Sedona, AZ 86340

    06 May 2008 css-nsf ΥΤΦ-8