2.2.5BKI2398, Kit, RLB for Aeroflex IFR 2398

Features

  • Use with Aeroflex 2398
  • Components useable to >3.0 GHz
  • High directivity Return Loss Bridge
  • Custom coax. cables with port labels
  • Use for ant/feedline measurements
  • Use for reflection measurements
  • Precision termination and short
  • Two attenuators included.

Applications

This kit is designed to compliment the Aeroflex 2398 communications service monitor. Included are all components required to perform swept antenna and feedline measurements. The components are contained in a durable plastic case. This not only protects the components during transit from one job to another, but also helps prevent loss.

To aid in hookup, the cables are labeled as to which port they connect to on the spectrum analyzer and return loss bridge. The connectors are also the correct ones so that no adapters are required.

Description

The case is 10 wide x 8 5/16 deep x 3 high. All of the components are supplied with the kit.

The return loss bridge covers from 5.0 Mhz to 3000 Mhz. For more information see RLB150N4B specification sheet.

The precision termination and short are used to verify that the bridge is in calibration and to determine the open/short ratio before making your measurement.

Description-continued

Two six db attenuators are included. These are useful when making return loss measurements where most of the power is reflected (high return loss). In these types of measurements it is necessary to improve the open short ratio. Using the attenuators improves the port match which improves the open short ratio.

The power splitter can be used for cable distance to fault measurements in conjunction with the Aeroflex 2398 and optional software.

Availability

The parts that are supplied with these kits are normally in stock so a kit can be constructed within one week of order.

Specifications & Ordering

Please see the next page for detailed specifications, performance graphs and ordering information. Refer to the price list on this site for pricing and terms for this product.

to next Page

TABLE OF SUPPLIED COMPONENTS

Item

Part No

Description

Use

Return Loss Bridge

RLB150N4B

Bridge, 5.0-3000 MHz

VSWR and Return Loss

Test Cable 1

128NMNM02R0

Cable, 50 ohm, N(m)-N(m), 2.0'

Gen. Out 2398 to SRC on RLB

Test Cable 2

128NMNM02R0

Cable, 50 ohm, N(m)-N(m), 2.0'

Anal. In 2398 to REF on RLB

Termination

RFT050NM2

Termination, 50 ohm, Precision

Directivity cal of bridge

Short

RFT000NM1

Termination, 0 ohm

Open/short cal of bridge

Power Divider

HPD123NF

Divider, Power DC-3.0 GHz

Use for cable fault test prog.

Attenuator

PFA060N

Attenuator 2W, 6 dB

Ant in to improve port match

Attenuator

PFA060N

Attenuator 2W, 6 dB

Ant in to improve port match

Case

01 1231 000001

Case, with foam padding

Carrying case for everything

SPECIFICATIONS

Electrical

Mechanical

Refer to individual component sheets for detailed specifications.

Case Size:

10"W x 8 5/16" D x 3" H

Weight:

< 2.0 lbs

website: eagle-1st.com

email: use contact page

Phone: 928 204-2597

PO Box 579

fax: 928 204-2568

ClarkDale, AZ 86324

08 Dec 2009 css-a ΥΤΦ-8

06-Nov-2009 css-a ΥΤΦ-8 Crea3DS2 4.7

12205000

11/07/2009