Applications

This kit is used to verify the calibration on the EAGLE RLB150 or RLB250 family of return loss bridges. The kit can also be used to verify or calibrate analyzers such as the Anritsu SiteMaster, Bird Site Analyzers or Aeroflex 3500 test Sets.
The precision termination and short are used to verify that the bridge is in calibration and to determine the open/short ratio before making your measurement.

Description
This kit contains one precision 50 ohm termination. The termination is used during the "load" portion of a calibration. The DC accuracy of the termination is within .05 ohm.
There is also an open. When installed this provides a dimensionally accurate outer transmission line for the female pin of the device being calibrated.
Also provided is a precision short The short occurs within 0.1mm of the reference plane of the "N" connector. This is used to determine the open/short ratio before making your measurement.

Description-continued

The components are contained in a durable plastic case. This not only protects the components during transit from one job to another, but also helps prevent loss.

Availability

The parts that are supplied with these kits are normally in stock so a kit can be constructed within one week of order.

Specifications & Ordering

Please see the next page for specifications, and ordering information. Refer to the price list on this site for pricing and terms for this product.