CKA8753, Kit, Cal, Network Analyzer DC-3.0 GHz

Features

Termination accuracy>-46 dB to 3.0 GHz
Components useable to >3.0 GHz
Use to calibrate HP8753 Analyzers
Two terminations provided
One year calibration cycle
Power rating: 2 watts continuous
Calibration plots of terminations included
Certificate of calibration included
Rugged Case

Applications

This kit is used to calibrate the HP8753 network analyzer. The kit can also be used to verify or calibrate analyzers such as the Anritsu SiteMaster or Bird Site Analyzers.
The precision termination and short are used to verify that the bridge is in calibration and to determine the open/short ratio before making your measurement.

Description
This kit contains two precision 50 ohm terminations. The termination is used during the "load" portion of a calibration. The DC accuracy of the termination is within .05 ohm.
There is also an open. When installed this provides a dimensionally accurate outer transmission line for the female pin of the device being calibrated.
Also provided is a precision short The short occurs within 0.1mm of the reference plane of the "N" connector. This is used to determine the open/short ratio before making your measurement.

Description-continued

The components are contained in a durable plastic case. This not only protects the components during transit from one job to another, but also helps prevent loss. The case is 5 1/2" long x 3" wide x 1 1/2" high.

Availability

The parts that are supplied with these kits are normally in stock so a kit can be constructed within one week of order.

Specifications & Ordering

Please see the next page for detailed specifications, performance graphs and ordering information. Refer to the price list on this site for pricing and terms for this product.